What do you need for remote unlock:

1. A Windows computer (pc or laptop) with an internet connection. For some unlock operation internet speed (download & upload) might be important, so you may run a test here and give us result before we start  >>Speed Test<<

2. USB cable for your model, make sure is genuine and fully working, connect it to a main USB port to your computer

How to root for unlock Note 4 SM-N910P on Android 6.0.1 (N910PVPU5DQI5 build):

DISCLAMER: Rooting the device will void the phone warranty, and knox related apps might not work on phones with tripped Knox

1. Go to Settings -> About Device -> Software info and check your firmware build number

wbsUg4

If your phone has build number N910PVPU5DQI5 or newer follow next steps, if firmware is older scroll down and follow root method for older firmware

2. Download on your computer stock firmware from here: N910PVPU5DQI5_N910PSPT5DQI5_SPR  Odin From here Odin3 v3.12.7 and  install USB drivers on your computer from HERE

3. Make a backup of your data, remove accounts and reset phone to start procedure from a clean firmware to avoid errors during root procedure

4. Go to your phone in  Settings > About device > scroll to bottom and tap “Build number” 7 times, now press back button once and tap Developer Options. Enable USB debugging and OEM unlock (if available) from developer options.

usbdebugging

5. Download this files: twrp-3.0.2-0-trltespr.img.tar.md5 and SM-N910P-PB5-ENG-ROOT-TWRP-FLASHABLE.zip

6. Connect the phone to the PC and copy to internal root storage file SM-N910P-PB5-ENG-ROOT-TWRP-FLASHABLE.zip

7. Power off phone completely. Hold Home and Volume – (volume down), keep them pressed and power the phone on.
Press Volume+ (volume up) when prompted to enter “Downloading Mode”, Connect USB and wait for all drivers to finish installing.

 Open Odin , then select “twrp-3.0.2-0-trltespr.img.tar.md5” in “AP” slot, make sure you uncheck “Auto Reboot” and “F. Reset Time” from Options before starting flashing file

n910ptwrp

8. Odin will show the downloading progress (and you’ll see a progress bar on the phone’s screen). and should indicate downloading success.
After downloading is complete, disconnect the USB cable from phone and reconnect the battery.
Simultaneously press Volume Up + Home + Power until the phone boots into the TWRP custom recovery. Flash SM-N910P-PB5-ENG-ROOT-TWRP-FLASHABLE.zip from recovery, this will take a few minutes, when it finishes push restart now (It will take several minutes to reboot, it’s normal)

9. When phone is back on go to Settings > About device > scroll to bottom and tap “Build number” 7-8 times, now press back button once and tap developer options, enable USB Debugging again if is disabled

10. Proceed to unlock network remotely. This service is paid, payment via paypal or skrill. Contact us before starting this procedure:
 Install necessary software (hamachi & usb redirector) on your PC following this tutorial, you will be asked to run a small USB remote program on your windows PC and a VPN software so our tech can unlock your phone.

11. After unlock is done flash stock firmware downloaded on step 2.

—————————————————————————————————————————————

How to root for unlock Note 4 SM-N910P on Android 6.0.1 (N910PVPS4DPD1 build and above):

1. Go to Settings > About device  scroll to bottom and tap “Build number” 7-8 times, now press back button once and tap developer options.
2. Enable USB debugging and OEM unlock from developer options (if available as option, else skip this step).
3. Connect the phone to the PC and copy BETA-SuperSU-v2.68-20160228150503.zip in your Note 4 sd card root: Computer\Galaxy Note4\Phone
4. Power off phone completely.
5. Hold Home and Volume – (down), keep them pressed and power the phone on.
6. Press Volume + (up) when prompted to enter “Downloading Mode”
7. Connect USB and wait for all drivers to finish installing (download and install drivers here).
8. Open Odin then select twrp-3.1.1-0-trlte.img.tar.md5 in “AP” slot, click on options tab, then deselect Auto Reboot then push START on Odin3, the file will be flashed.
9. Reconnect battery and hold Home and Volume + (up), keep them pressed and power the phone on, phone will turn on and load recovery menu
10. Once in TWRP recovery, swipe right to allow modifications.
11. Tap Install then select BETA-SuperSU-v2.68-20160228150503.zip
12. Swipe to confirm Flash, phone is now rooted
13. Proceed to unlock network remotely. This service is paid, payment via paypal or skrill. Contact us before starting this procedure:
 Install necessary software (hamachi & usb redirector) on your PC following this tutorial, you will be asked to run a small USB remote program on your windows PC and a VPN software so our tech can unlock your phone.

Video examples for unlock remote online on Youtube Channel

Advertisements